ES500-ES750 Electric switchboard for clinical use, designed to power supply operating theatres or high electrical risk units.

The safety equipment power for these areas varies in accordance with the consumption needs of each unit. For operating theatres, power ranges from 5 to 7.5KVA, both for single-phase and three-phase networks.

• Set mounted on metallic sheet cupboard, treated with backed-on paint.
• Interior blind door for placing elements and transparent exterior door for instrument viewing.
• Clinical insulation transformer according to UNE 20615 standard.
• Monitor insulation detector by resistance control certified under UNE EN 60601 and UNE 20615 standards.
• Primary protection by automatic switch, type D high breaking power megnetothermic.
• Secondary outputs protected by 10A automatic switches.
• Outlet for portable RX by means of 25A magnetothermic switch and 40A 30mA differential.Embarrado de puesta a tierra y equipotencialidad.
• Earth and equipotentiality busbar.

This equipment is manufactured in accordance with the requirements of the ICT-38 for Low Tension Electro-technical Regulations.

BATTERY EQUIPMENT The electro-technical regulation in force for low tension, instruction 038, requires the availability of a special complementary supply to deal with the need to maintain autonomy of 2h in operating theatre lamps.

The EB's which we propose fully meet this requirement, providing several models and powers to serve each one of the different lamp models on the market.

EQUIPMENT MODELS:

EB250

Power: 250W
Autonomy: 2h
Normal - Help Type
Size: 620 x 500 x 250mm

EB400

Power: 400W
Autonomy: 2h
Normal - Help Type
Size: 620 x 500 x 250mm

EB600

Power: 600W
Autonomy: 2h
Normal - Help Type
Size: 1020 x 600 x 250mm

EB800

Power: 800W
Autonomy: 2h
Normal - Help Type
Size: 1020 x 600 x 300mm

MULTI TRAFO EQUIPMENT Switchboard for clinical use, designed to supply voltage to critical areas, like for example, intensive care, neonatal or reanimation. The multi-trafo electrical safety equipment is designed in accordance to the requirements of each area and depending on the number of units to guard.

In these essential units the usual voltages range from 2 to 4KVA per bed.
The ES MULTI-TRAFO adapt to the requirements of each project, both in number of transformers and in secondary outputs.

This equipment is manufactured in accordance to the requirements of the ICT - 38 of the Low Tension electro-technical regulation in force.

TDS240 (Insulation detector monitor) The main objective of this monitor is to provide the technical staff with a monitoring system of the insulation resistance between any of the input phases and the ground connection of the different areas monitored.

General specifications of the TDS 240 monitor:

• LCD Display of 16 characters x 2 lines.
• Two-scale viewing (Kohm and mA).
• Option of Single-phase or three-phase connection in the same equipment.
• Option for connections from 110V to 240V.
• Communication via RS 485 bus for multi-repeater (32 monitors).
• Communication via RS 485 bus for remote control (32 monitors).
• Configuration menu and data download from PC.
• Test key and acoustic alarm stop key.

TDS249 MRP (Electric alarm multi-repeater) The TDS 249 network insulation monitor multi-repeater has the objective of providing clinical staff and/or maintenance staff of a monitoring system with the insulation monitors connected to it, located in the different areas of the hospital.

General specifications of the TDS 249 MRR.:

• LCD Display of 16 characters x 2 lines.
• Two-scale viewing (Kohm and mA).
• Option of Single-phase or three-phase connection in the same equipment.
• Option for connections from 110V to 240V.
• Communication via RS 485 bus.
• Alarm Status viewing of up to 32 monitors (ok / failure).
• Possibility of knowing the current value of all the monitors.
• Configuration menu and data download from PC.
• Power supply through the first monitor connected.
• Test key.
  
  

TDS149 C (Electric alarm repeater) Single repeater to be installed inside the unit to monitor, normally operating theatres. Its function is to repeat the signals from the monitor installed in the electric safety equipment.